Skip to content

How to Install an SSD in Your PlayStation 4 in Less Than Ten Minutes

How to Install an SSD in Your PlayStation 4 in Less Than Ten Minutes

If you’re looking to upgrade your PlayStation 4’s storage space, or just want a faster system overall, an SSD is a great option. It’s much more reliable than a standard hard drive, and can boot up faster.

We’ve seen how the PS4 is able to play games from other consoles from Sony, but the platform has been missing one thing: backwards compatibility with PlayStation 3 titles. Unfortunately, Sony has no plans to bring the PS3 backward compatibility to the PlayStation 4.

Choose the Right SSD For PlayStation

The console offers great features and performance, but it can be improved with an SSD. This article will help you choose the right SSD for your PlayStation 4 Pro.

When choosing an SSD for your PlayStation 4 Pro, you need to consider its form factor and capacity. The most popular form factor for SSDs is 2.5 inches, so you should look for one that is compatible with your console. Capacity is also important, so you should choose an SSD that has enough storage for your needs.

Another thing to consider when choosing an SSD for your PlayStation 4 Pro is its speed. The console supports PCIe 3.0 x4 NVMe drives, so you should look for an SSD that has this specification.

Prepare Your Gear

1. Before starting the installation, make sure that you have all of the necessary gear. This includes an SSD, a Phillips head screwdriver, and a USB drive.

2. The first step is to remove the cover of the PlayStation 4. There are eight screws in total that will need to be removed. Three of these are located on the rear of the console, while the others are on the front and sides.

3. Once the screws have been removed, carefully lift off the cover and set it aside.

4. Next, locate the hard drive cage and remove the four screws that hold it in place.

5. Carefully remove the hard drive cage and set it aside. Be careful not to touch any of the internal components inside of the console.

6. Now it’s time to install your SSD.

Insert the SSD Into the Expansion Slot

First, remove the cover of the PlayStation 4 by lifting up on the tabs located at the back of the console.

Next, locate the expansion slot and insert the SSD into it.

Replace the cover of the console and press down on it until it clicks into place.

Power on your PlayStation 4 and follow the on-screen instructions to format the SSD.

Once the formatting process is complete, you can start installing games and applications onto the SSD.

Enjoy improved performance with your new SSD!

Format the SSD

Step 1: Format the SSD.

Before installing the SSD, you’ll need to format it. This will erase all of the data on the drive, so make sure to back up any files you want to keep. To format the drive, go to Settings > Devices > Storage and select your SSD. Then, tap Format as Extended Storage and follow the on-screen instructions.

Step 2: Remove the old hard drive.

The next step is to remove the old hard drive from your PlayStation 4. To do this, flip your console over and remove the six screws that hold the cover in place. Once the screws are removed, lift up the cover and set it aside. You’ll then see two screws that hold the hard drive in place; remove these screws and pull out the hard drive.

Step 3: Install the SSD.